- 9 l/min Flow Rate @ 0.3MPa
- Easily cleanable silicone jets
- Thin visible edge of 2mm, modern square design
This product is made from Grade 304 Stainless Steel.
What’s in the box:
1069 Shower Rose SQ 200mm
Tools needed (not supplied):
- Before assembling to shower arm, make sure the shower arm has been flushed by running some water through it without the shower rose connected.
Product Dimensions: 200mm (w) x 200mm(d) x 51mm(h)
Material: Grade 304 Stainless Steel
Standard Flow Rate: 9.0 l/min (@ 300kPa/0.3MPa)
Warranty: 2 Year Limited Guarantee
Package Dimensions: 22.0cm (w) x 22.0cm (d) x 8.0cm (h)
Package Weight: 0.86kg
*these dimensions/weights may change without notice
Manufacturing Warranty:(Product Guarantee)
All components of LIQUID RED® Chrome Plated TAPWARE, excluding colour finishes, are guaranteed against any manufacturing defects for a period of 12 years from the date of purchase, as printed on the sales docket, which must be provided as proof of purchase. Hand showers, shower roses, shower arms, and hoses are also guaranteed against manufacturing defects for a period of 2 years from the date of purchase.
Colour Finishes:(Finish Guarantee)
The surface finish of all colour components (including PVD and other coating methods) of LIQUID RED TAPWARE and related products are guaranteed against any manufacturing defects for a period of 1 year from the date of purchase, as printed on the sales docket, which must be provided as proof of purchase.
Excluded from this warranty are damages resulting from force majeure (Acts of God), including, but not limited to, lightning and floods, fair wear and tear, misuse, wilful damage, negligence, repair of the device without the approval of Bathroom Butler or damage resulting from incorrect Installation.
The manufacturer’s liability is limited to the repair or replacement of LIQUID RED® TAPWARE only. No claim for consequential damage and/or labor and/or transport will be entertained. Damages arising from misuse of the bathroom accessory will render the warranty invalid.
This warranty is only valid when the product has been purchased from an authorized reseller or country/territory distributor and is only valid within the geographical borders of the country/territory where it was originally purchased. This warranty only extends to the original purchaser of this product and is not transferable.
*Some products or ranges are only available in selected geographical regions.
CLEANING & CARE: Chrome-plated TAPWARE
LIQUID RED® TAPWARE is Chrome plated and should be cleaned regularly with a warm damp cloth and buffed dry with a clean dry cloth. Do not use the rough end of a kitchen sponge to clean your tapware. DO NOT clean your tapware with any kind of ACID-BASED CHEMICAL, TILE CLEANER or detergents that contain CHLORINE. This may contaminate and damage the surface finish of the tapware.
CLEANING & CARE: Colour Finishes
Clean daily using only warm water and dry off with a soft cloth. DO NOT use any household detergents. DO NOT use any abrasive cleaning materials. DO NOT allow any residue to dry on the tap surface such as toothpaste, shaving cream, hand soap, and other bathroom products. Clean off immediately with water and dry with a soft cloth. The Matt Black finish is a coated surface; therefore it is possible to chip it which is not covered by the warranty. DO NOT bump or scratch with other objects.
Cleaning & Care: Chrome plated and stainless steel finishes
To keep your LIQUIDRed product in pristine condition, regularly wipe it down with a warm damp cloth and then buff dry with a clean dry microfiber cloth. You could also, on occasion use a Chlorine-free stainless steel cleaner/polish or chrome polish to maintain the shine. If you use stainless steel polish, make sure it is abrasive free.
When cleaning wall or counter surfaces around your product do not use any household detergents that may contain Chlorine based chemicals such as bleach as it will cause permanent damage to the surface of the chrome plating or stainless steel. Take special care with all colour finishes.
DO NOT use the rough end of a kitchen sponge to clean your product.
DO NOT clean your product with any kind of ACID BASED CHEMICAL, TILE CLEANER or detergents that contain CHLORINE. This may contaminate and damage the surface finish of the product.
Cleaning & Care: Colour finishes
Clean daily using only warm water and dry off with a soft cloth.
DO NOT use any household or industrial detergents. DO NOT use any abrasive cleaning materials.
DO NOT allow any residue to dry on the surface of your product such as toothpaste, shaving cream, soap bars, liquid hand soaps and any other bathroom products as these may damage the coating. Clean off immediately with water and dry with a soft cloth.
The Matt Black finish is a coated surface, therefore it is possible to chip it by bumping with other hard objects which is not covered by the warranty. DO NOT bump or scratch with other objects.